What impact does the laser power supply of the laser cutting machine have on the machine? We all know that each laser head of a CO2 laser cutting machine has a laser tube, which is used to drive the laser tube to emit light. What problems will the power supply bring to the machine? How good or bad does it affect the machine?
The power supply drives the tube. It relies on high current to light the glass tube. The current is equivalent to the throttle of the car. Therefore, the cutting speed and slowness of the machine depend on the power supply to light the glass tube. If the current is too high, the machine’s The cutting speed will be faster, and it can provide high power to the tube, but it will also bring a bad side to the tube, just like a car. If it is allowed to work at full capacity for a long time, it will also give the tube. The service life has an impact. The power supply has always supplied high current to the tube. What's more, the use time of the tube will decrease.
If the current of the power supply is adjusted too low, the power of the tube will decrease, and the cutting speed will slow down. Under normal circumstances, do not supply too high or too low current to the tube, let it be in a reasonable The interval contributes to the use time of the tube and also the cutting speed. In the case of cutting, the power generally should not exceed 80% of the power, that is, do not let it work at full load during the cutting time. It not only ensures the cutting speed of the machine, but also contributes to the use time of the tube, both of which are in a good state.
