Products Description
Laser welding machine uses a advanced technology, it uses a high-powered laser beam to fuse metal parts or materials together. This innovative technology has gained popularity due to its accuracy, efficiency, and reliability. Compared with traditional welding methods, laser welding machine produces a precise and clean weld. This method of welding also minimizes distortion and reduces the chances of defects, such as porosity. Furthermore, it has a faster processing time, which means a faster turnaround time for projects.
Machine's advantages
1. Perfect welding seam
Laser welding with less deformation, small heat-affected zone, high aspect ratio. The welding seam is beautiful, smooth, without air holes, no need to handle or simple treatment after welding, small spotlight, no pollution.
2. Precise welding
High-precision positioning, the handle laser welding machine can be used for small open parts and precise welding. Compared with traditional welding machine, overheat welding may cause materials deformation, more and more companies use laser welding machine for processing and manufacturing.
3. High quality welding
When the laser welding machine is used for processing, the welding surface is very flat, and the problem of excessive surface dissolution area during traditional welding processing does not occur, so the welding quality of the laser welding machine is very good.
4. Fast welding speed
The laser welding machine equipped with a powerful servo motor and laser source, so the welding speed is fast and welding effect is perfect. Fast welding speed saves a lot of processing time and labor cost.
Machine's picture
Laser welding VS Traditional welding methods
a. Laser welding:
1. Precise welding, excellent time control,fast welding speed
2. Welding surface is flat, smooth with good touching experience
3. Perfect and continuous welding seam
4. Low temperature welding, no damage to the materials
5. Non-contact welding, saves processing cost
b. Traditional welding methods:
1. Rough welding, can't perform well time control, slow welding speed
2. Rough welding surface, uneven welding surface
3. Bad touching experience of welding seam
4. High temperature welding, might damage to the materials
Parameter
|
Model |
DS1500/DS200/DS3000 |
|
Laser power |
1500W/2000W/3000W |
|
Pulse width |
0.1-20ms |
|
Operating voltage |
220V/380V |
|
Fiber length |
10M/12M/15M, Maximum 20m |
|
Maximum Oscillation Speed |
20000mm/s |
|
Frequency |
0-100HZ |
|
Wavelength |
1064nm |
|
Solder joint size |
0.2-3.0mm |
|
Cooling method |
Water cooling |
|
Laser model |
CW |
|
Observation system |
Microscope (rotatable 360 degree) or display |
|
Positioning |
Red indicator |
Machine's shipment
