Laser sandblasting
1. What's sandblasting?
Sandblasting, often also called abrasive blasting, is a method used to remove surface contamination, smoothen rough surfaces, and also roughen smooth surfaces. This is a rather low-cost technique thanks to its inexpensive equipment, and it is simple while delivering high-quality results.
2. How does sandblasting process work?
a. The sandblasting process works by propelling sandblasting media to a surface through the use of a sandblaster. The sandblaster has two main components: the blast pot and the air intake. The blast pot holds the abrasive blasting media and funnels the particles through a valve. The air intake is powered by an air compressor that applies pressure to media inside the chamber. It exits the nozzle at high speeds, impacting the surface with force.
b. The sandblast can remove debris, clean surfaces, remove paint, and improve the surface finish of the material. Its results greatly depend on the type of abrasive and its properties. Modern sandblast equipment has a recovery system that collects the used media and refills the blast pot.
3.Applications of sandblasting techniques
a. Remove paint: such as cars, machinery, home and more
b. Finish device: use to polish mechinery and buff out irregularities
c. Cleaning large and small tools: remove oil,dirt and grease from large mahinery, small toolsincluding rusty wrenches, screwdrivers and more can be sandblasted to streamline and speed up the cleaning process.
DOTSLASER partial large format laser sandblasting machines:
Laser sandblasting mirror samples
