First, the laser marking machine should be used as far as possible in a dust-free, 10℃-35℃ environment, and keep the optics dry and dust-free. It is usually necessary to ensure a separate closed workshop, to ensure the indoor constant temperature, to have floor paint or ceramic tiles on the floor, and to install air conditioning;
Second, the customer must provide the main power supply to support at least 2500W AC single-phase power, and the main power cord of the equipment provided by our company must be installed on an air switch for protection, and the use of triangular plugs is strictly prohibited;
Third, the main power supply provided by the customer must have a ground wire, and virtual connection is strictly prohibited!
Fourth, the cooling water in the circulating water tank is best to use deionized water. If there is no deionized water, it can be replaced by distilled water; the circulating cooling water should be replaced in time after a period of use (it is recommended to change the water at least once every two weeks), so as not to affect the laser efficiency .
