Laser welding machine operating instruction
Laser welding machine is widely used because of its obvious characteristics such as small welding seam, fast welding speed and no porosity. However, many people do not know how to use it correctly when operating laser welding machine. In fact, laser welding machine is in use. There are many safety regulations that need our attention
The first point: Read the instruction manual carefully, and operate the laser welding machine in strict accordance with the operating procedures to ensure the equipment and personal safety.
The second point: The circulating water in the laser welding machine must be kept clean, otherwise, the output of the laser will be affected. The user can determine the cycle of replacing the cooling water according to the start-up time, water quality and other conditions. Generally speaking, the water cycle in summer is better than winter. Be shorter.
The third point: The laser welding machine shell needs to be connected to a safety ground. During work, do not look directly at the laser beam with your eyes, and do not let your body (such as hands) touch the laser beam to avoid injury.
Fourth point: Pay attention to keep the environment and the laser welding machine clean, and always check whether the laser rod and optical components are contaminated.
Fifth point: If you need to overhaul the laser welding machine, you must cut off the power and make sure that the charge on the energy storage capacitor has been discharged before proceeding, so as to avoid electric shock accidents. If an abnormal phenomenon occurs during operation, power off (press the <emergency stop> and air switch) to check.
The above are some of the safe operation specifications of laser welding machines. Only after we have mastered these specifications, we can't have problems when using laser welding machines. Therefore, the above points are very necessary to understand.
