CO₂ Laser Marking Glass

CO₂ Laser Marking Glass

CO₂ Laser Marking Glass is a revolutionary product in the glass marking industry. This cutting-edge technology uses a specialized CO₂ laser beam to etch glass with high precision and speed. The process of CO₂ laser marking glass is simple yet highly effective. The laser etches the glass surface by vaporizing the material in a controlled manner, leaving behind a precise marking that is both permanent and highly resistant to abrasion and wear. This technique allows for custom designs, text, logos, and intricate patterns to be permanently etched onto glass surfaces with absolute precision.

Parameter of laser marking glass machine

 Because of the fragile nature of glass, engraving on the surface of glass products is also more demanding in terms of process. Compared with ordinary marking methods, laser marking technology is a frequent choice for glass products processing because of its high processing efficiency, beautiful and detailed marking products, and no material consumption, environmental protection and energy saving, and easy maintenance.

 

 

working process

 Laser marking machine processing a common one is to use a laser radiation on the glass surface to produce a visible outline of the mark, a few days later the laser extended to the original mark outside the nearby area to form a fragment, and then use multiple radiation, so that the area adjacent to the marked area is heated by heat conduction, so that these areas form a stress gradient, thereby reducing the possibility of secondary rupture, using this method in soda lime glass and borosilicate glass Marking is very effective. Small glass vials containing liquid pharmaceuticals, and household glasses can be marked using this method.

 For contact laser marking machine is a short processing time, can form a fine beam, can achieve fine marking of tempered glass materials, and any complex text, graphics, images, trademarks, LOGO, bar codes, QR codes, production batch numbers, autographs, etc., and any complex text, graphics, images, trademarks, LOGO, bar codes, QR codes, production batch numbers, autographs, etc., can be achieved by laser marking machine. production batch number, autograph, etc., can be marked by laser marking machine, fine and beautiful lines, beautiful and generous, very suitable for the surface of the glass material pattern or text information marking.

How does machine work?

 

 Firstly Laser marking machine kind of method is the use of multiple laser radiation selected a laser radiation can produce a sharp outline on the glass visible symbols, but the direction of cracks and stress patterns will expand in the direction perpendicular to the laser movement. Within a short time or even a few days after the mark is printed, these cracks perpendicular to the direction of laser movement will form new cracks that will expand to form debris in the area outside the original mark, thus affecting the clarity of the mark. Using multiple laser radiation, the area adjacent to the marker area is heated by heat conduction, thus forming a stress gradient in these areas and reducing the possibility of secondary rupture.

 Second, laser marking machine discrete dots constitute a ring crack method uses a series of ring cracks to form text, bar codes, square or rectangular codes and other shapes code drawings. The glass undergoes a heating and cooling cycle occurs low density ring crack. Glass heating occurs when the expansion of extrusion around the material, when the temperature rises to the glass softening point temperature, the glass rapidly expands to form a low-density material protruding from the glass exterior of the dome.

 Third, the laser marking machine occurs cracked appearance cracking method is also used the same heating and cooling process, are to make a particular volume of the glass surface changes. Cracked appearance glass is not only environmentally friendly, but also can play the role of ice cracking non-fully transparent, so it is widely used in interior decoration, such as intervals, backdrops, can also be used for glass home furnishings, popular with consumers.

 

Shipping and Package

1. Quality assurance and after-sales service

 The warranty period of the equipment shall be 12 months since the equipment be used by the customers, the installation and debugging is completed and the equipment is accepted by the demander. Dotslaser attaches great importance to the after-sales service work of the product, once the product is delivered to the user, the company immediately established the user after-sales service file, and regularly track the user's product use status, solve and answer all the problems of the user, received the user's notification information about the equipment failure, the company's workers can make a rapid response within 2 hours. If the telephone guidance is difficult to troubleshoot, our company's technical staff can arrive at the customer site within 24 hours to provide support.

2. Installation and debugging

 Before machine installation, our factory will offer you a basic structure installation file,the good need 2 weeks delivery to you there , the engineers of Dotslaser will arrive at your site and inspect the machine again. Comfirm all the conditions meet the installation and commissioning requirements of the equipment, the equipment will transport in time. The installation and commissioning time of the equipment is about five working days, the first three days are connected to the use of the system, and the system is operational after the service project. The engineer will train qualified operators on basic maintenance procedures and general operating characteristics of the equipment in the next two days

3. Service support

 If there has any problem with any part of the system during the warranty period, Dotslaser well-trained service engineers are ready to provide cellphone call or begin on-site service,if the machine has any problem during the warranty period,please contact us directly !