Laser Marking Machine For Gold Jewellery

Laser Marking Machine For Gold Jewellery

Laser Marking Machine For Gold Jewellery is an equipment mainly used for gold jewelry processing. This product of ours is mainly made of high-quality raw materials, the surface is strong and durable, not easy to deform, and it is very convenient to move. It can realize processing automation, save labor, provide work efficiency, and is easy to realize an automated production line compatible with multiple products. Laser Marking Machine For Gold Jewellery is really a good choice for people.

 

 

How did Laser marking machine for gold jewellery work ?

How gold be made to jewellery?

 

 The general engraving process of gold jewelry: melting gold → inverted mold → polishing → die holding → calendering → engraving → QC (inspection) → finished product ;

 

* Gold melting: The raw gold in the quartz crucible is mainly heated by an induction melting furnace and smelted into materials suitable for processing jewelry.

* Inverted mold: Use a vacuum suction line inverted mold machine or a vacuum pressure casting machine to melt the gold ingredients and then pour them into a plaster mold to cast the castings.

* Polishing: The process of using a magnetic polishing machine to produce luster on the surface of the casting.

* Mold holding: Use auxiliary tools to weld, file, and hammer the castings to repair the deformation and surface roughness of the castings during the casting process.

* Calendering: Touch the gold surface with an agate pen and rub the workpiece to make the surface of the workpiece bright.

 

 Metal laser processing only needs to design the graphics on the computer, and then  desired arbitrary graphics can be presented immediately, free adjustment of size and depth, high precision, fast speed, smooth cuts and no burrs, and no "contactless" processing. 

Products Parameters

Engraving and cutting samples

Shipment and package

Daily maintenance

● After finishing work, make sure the floor is clean. Then clean the machine including the surface of the machine, the case of the optical system, the surface of the monitor, the work table, and so on.

● Please turn off each part and main power supply when they are clean.

● Check the lens regularly for dust. When it's clean, use the cotton wool with greater than 95% medical grade alcohol to wipe clockwise from the center of the lens. When you need to move the machine to avoid bumps. Check the connection cable according to the cable list.

Unpacking Caution

Every marking machine has been rigorously tested at the factory, only qualified product for shipment. When you receive the freight, please check as follows. If you have any questions, please contact the agent or staff at DOTSLASER.

● Whether there is damage or deformation during transport.

● Confirm that all of the items on the packing list are correct.

● Confirm that the model of the product matches the nameplate(Operating voltage and KVA number).

● Make sure that all clamps are tight and that there are no foreign objects in the device.

● Confirm the operation buttons, switches are normal.